If you are using this IP address 192.168.0.1.1, then you are wrong. It is actually 192.168.0.1 but not 192.168.0.1.1. It is a private IPv4 network address, used to set up the configuration of the router. Get full access to the management panel by giving the correct username and password on the login page. The software installed in the gadgets will help you to operate the network without any issues.
You have other default gateway addresses like 192.168.1.1 and 192.168.0.1. Using this IP address, you can control the router and can change the LAN, WAN, WLAN settings, IP QoS, DNS, Proxy, DSL, ADSL, MAC, WPS, security options settings. Modifying the settings manually will affect the network if you are wrongly configured. Beware, Think before you do. If you are sure about the network changes, then make a move. Nor leave the default settings as it is.
What can you do with the IP 192.168.0.1.1 address?
Before pointing your browser to a specific IP address, check whether 192.168.0.1 is your default gateway. If you are not able to access the panel even if you point your address on the web browser, then it indicates that is not your router’s IP address. To find the actual IP address, you need to use the Command Prompt Window to see. Go to Start menu and open Run field. Type “cmd” on the Run field to open command prompt window. Once the window is opened, type “ipconfig” and press the enter button. Now you will see a lot of network details about your router. There you can check for default gateway which comes under Wireless LAN adapter Wi-Fi.
Now, you have found your router’s IP address. If you are interested in changing the settings of your router, then open your web browser and point http://192.168.0.1 on the address bar. It will take you to the admin login panel. To enter into the panel, you need to fill the username and password of your router network. If your modem is new, then you don’t need to worry. Fill the details with the default username and password from the list.
How to get recover if you forgot your username and password?
In this case, you need to reset your wireless router or ADSL modem for about 30 seconds. To reset the router, you need a needle to insert into the hole and hold them for few seconds. This helps you to reboot the system and flushes your router memory. This makes the username and password of the router as default. Now, you can enter the default username and password of the specific router.