192.168.1.2 is the default gateway IP address which is used for home broadband routers and other several router manufacturers as a default address for the router itself. The access point is sold outside of the United States. Using this IP address, you can manage your wireless router panel and can modify the settings on your router. It gives you full access to the administrative panel of your modem and allowing you to alter the configuration related to the router. 192.168.1.2 is a private IPv4 network address and you cannot use the address from outside your home network.
How 192.168.1.2 Works?
Several routers like Senao, and Philips are using this IP address as default which is set by the manufacturer. However, you can also connect to 192.168.1.2 using any routers of a local area network and there is no restriction on it. Several devices can connect to this IP address from the different network, but if you try to connect 126.96.36.199.2 on the same network using two or more devices, them it may result in address conflicts.
To avoid conflicts, only one device on the network shout use the IP. We all know that 192.168.1.2 is a private IPv4 network address and it cannot connect to a router from outside the home network. To use the router from outside the home network, then you should use the router’s public IP address.
Why does the IP address 192.168.1.2 so Popular?
Not every IP addresses are private but only a few. At first, 192.168.1.x is set as default by broadband router manufacturers like Linksys and Netgear. We knew that the private IP address range starts with 192.168.0.0 and most people think of a number sequence as starting from one one than zero, making this IP address server for a home network address range. Then it becomes so familiar among the local area network and it is used by several routers around the globe.
How to Connect to a Router using 192.168.1.2?
It is quite easy to connect to a router using this private IP address. If you have already known that your router is using 192.168.1.2 address, then log into its console by pointing your web browser to http://192.168.1.2/. This pushes the browser to the router’s administration login page and asks you to fill the username and password in that specific admin page. Fill your information correct and proceed to redirect to a management panel of your router. Once you are log into the administration panel, you are able to change the settings of your router like DNS, PROXY, system administration, LAN, WAN, WLAN (WiFi), Virtual directing, Protocol settings, IP Qos, NAT virtual server, DMZ, an assortment of security alternatives, DHCP customer DSL, WPS, blocking, ADSL, and other MAC.
Issues with 192.168.1.2
- There is a huge possibility of error if the address is assigned manually, that results in connection issues. But most of the networks assign private IP addresses dynamically using DHCP.
- When two device from the same network tries to connect to 192.168.1.2, then it results in IP address conflicts.
- Each router is configured with a range of private addresses that uses DHCP, it can allocate to clients.
- A router will not check whether 192.168.1.2 has already been assigned to a client manually before assigning it to a client automatically